When deciding on a burning table (that's the general name for plasma and/or oxy fuel machines) the question arises as to how it should be equipped. Should you select Oxy-Fuel or Plasma, or even both? Which is best for your application and what’s the difference anyway?
It depends on a few factors, including the type of metal you’ll want to cut, the thickness of that metal, the tolerances you will be cutting too and the time/costy you're willing to invest in making these cuts. For thicker ferrous steel applications, an oxy-fuel is generally the better way to go. Other non ferrous materials like stainless and aluminum work much better under a plasma torch. However your understanding of the differences between the two cutting processes is crucial in knowing which to use, when to use it and what the benefits are.
Plasma cutting uses an energized stream of Plasma which is a superheated, electrically ionized gas, which vaporizes and melts the material. Ideal applications for plasma cutting include steel, brass, copper and other conductive metals which yield under intense heat. Tolerances can be held as close as +/- 0.005” but are generally in the +/- 0.015” range.
Plasma cutting machinery are frequently not only found in steel fabrication shops but other applications too such as: automotive repair and restoration, industrial construction, and salvage and scrapping operations with many of these other applications using a hand held variant of the precision plasma found on Bendmak Machines.
With high speed, precision cuts and low cost, plasma cutting is suited to industrial applications where the material thickness is 2” or less and the tolerance variables acceptable..
Oxy-Fuel cutting is a thermal cutting process that uses oxygen and fuel gas to create a flame. The flame is then positioned over the workp[ieces to preheat and then melt away a path of material. Gasses used in the Oxy-Fuel process can be acetylene, propane, propylene or natural gas, and are mixed with Oxygen to intensify the heat and effect resulting in an intensified burn.
Deciding between these two very capable processes does not have to be a difficult one as most machines are capable of supporting both technologies. And although cutting technology has its unique advantages, the most important factors to consider when choosing between plasma and oxy-fuel are the types of metal and the material thicknesses you will need to cut.
In general if you have the need to cut thicker metals, an oxy-fuel system makes the most sense for your operations. However, if you require precision cutting of not only steel, but stainless and aluminum too, the plasma cutter is your best choice.
Contact your team at BendmakUSA to see how the Bendmak BPM and BPM-T Series of Plasma and Oxy Fuel Cutting systems can add productivity and capability to your shop.